0
προγράμματα:
Γλώσσα:

Applicability criteria and assessment range

Liquefaction assessment is performed only for saturated soil layers located below the groundwater table for which liquefaction assessment has been enabled in the soil definition. This allows the user to take into account available information on the soil’s susceptibility to liquefaction, for example, based on laboratory tests or a geotechnical investigation.

Individual assessment methods may also define their own applicability criteria. If any of these criteria are not met, the soil is not assessed using the respective method. Examples include a limiting fines content or exceeding the limiting value of the soil behavior type index Ic,SBT. The applicability criteria may differ between individual methods.

Compliance with the applicability criteria is indicated in the output report as part of the intermediate results. If a soil layer is excluded from the assessment, neither the resulting factor of safety nor the final liquefaction assessment is provided for that layer. The intermediate results that led to the exclusion are highlighted in red.

The scope of the assessment can be limited using the "Ignore upper layer" and "Limit the depth of assessment " options in the "Liquefaction" frame. The first option allows the user to exclude a specified thickness of the upper soil layer from the assessment, while the second sets the maximum depth of the assessed zone.

Note: For a standard simplified assessment, an assessment depth of approximately 20 m is recommended. For greater depths, the use of a more detailed analysis method should be considered.

Δοκιμάστε το λογισμικό GEO5. Δωρεάν, χωρίς περιορισμούς στην ανάλυση.